Adam, E.; Vergison, E.; Kolski, C. and Mandiau, R. (1997) “Holonic User Drive Methodologies and Tools for Simulating Human Organizations”. In: Hahn, W. and Lehmann, A. (Eds.) Proceedings of the 9^th European Simulation Symposium, pp.57-61. October 19-22, 1997. Passau, Germany.

Agre, J.; Elsley, G.; McFarlane, D.; Cheng, J. and Gunn, B. (1994) “Holonic Control of Cooling Control Systems”. In Proceedings of the Rensselaer's 4th International Conference on Computer Integrated Manufacturing and Automation Technology

AIIM (URL) “Resource Center Report”. AIIM International. http://www.aiim.org/industry/resource/rc_report.html

Albayrak, S. and Bussmann, S. (1996b) “Introduction”. In: S. Albayrak and S. Bussmann (Eds.), Proceedings of the European Workshop on Agent-Oriented Systems in Manufacturing, pp.i-ii. Berlim, Alemanha, 26 e 27 de Setembro de 1996.

Albayrak, S. and Bussmann, S. (Eds.) (1996a) Proceedings of the European Workshop on Agent-Oriented Systems in Manufacturing (EWAOSM’96). Berlim, Alemanha, 26 e 27 de Setembro de 1996.

Almeida, A. (1995) “Escalonamento Dinâmico de Tarefas Industriais Sujeitas a Prazos de Entrega”. Dissertação de Mestrado. Faculdade de Engenharia da Universidade do Porto. Setembro de 1995.

Analide, C. e Neves, J. (1996) “Representação de Informação Incompleta”. Unidade de Ensino. Departamento de Informática. Universidade do Minho. Braga, Portugal. Novembro 1996.

Analide, C. e Neves, J. (1997) “Estruturas Hierárquicas com Herança”. Unidade de Ensino. Departamento de Informática. Universidade do Minho. Braga, Portugal. Janeiro 1997.

Atkinson, R. and Court, R. (1998) The New Economy Index: Understanding America’s Economic Transformation. Technology, Innovation, and New Economy Project. Progressive Policy Institute. November 1998. (disponível online em http://www.neweconomyindex.org/)

Axelrod, R. (1984) The Evolution of Cooperation. Basic : New York, USA.

Ayres, R. (1989) “Technology Forecast for CIM”. Manufacturing Review, vol. 2(1), pp.43-52, 1989.

Azevedo, A. and Sousa, J. (1997) “On the Design of an Order Promise System for Virtual Enterprises”. Proceedings of the Conference on Management and Control of Production and Logistics (MCPL’97). Campinas, SP, Brazil.

Baker, A.; Parunak, H. and Erol, K. (1997) “Manufacturing Over the Internet into Your Living Room: Perspectives From the AARIA Project”. Center for electronic Commerce Report CEC-0-9. (disponível online em http://www.aaria.uc.edu/cybermfg.ps )

Balasubramanian, S. and Norrie, D. (1995) “A multi-Agent Intelligent Design System Integrating Manufacturing and Shop-Floor Control”. In: Proceedings of the 1^st International Conference on Multi-Agent Systems (ICMAS’95). San Francisco, California, USA. 12-14 June 1995. (dísponivel online em http://ksi.cpsc.ucalgary.ca/DME/AnAgent.html)

Barram, D. (1994) “Keynote Address”. North American Symposium – Preparing for the Full-Scale IMS Program”. June 23, 1994, Dallas, Texas, USA. http://ksi.cpsc.ucalgary.ca/IMS/Dallas/IMS_Barram.html

Baumgartel, H.; Bussmnann, S. and Klosterberg, M. (1997) “Multi-Agent Co-ordination of Material Flow in a Car Plant”. In Proceedings of The second international conference and exibition on the practical application of intelligent agents and multi-agent technology (PAAM'97), pp.227-236. London, UK. 21-23 April 1997.

Besant, C. and Lui, C. (1986) Computer-Aided Design and Manufacture. Ellis Horwood Limited: England.

Bohez, E. and Limsombutanan, B. (1999) “Curvature Analysis Based Holon For 5-Axis Milling Cutter Selection and Tool Path Planning”. Electronic Journal of the School of Advanced Technologies, vol. 1(2). July 1999. Asian Institute of Technology. (ISSN 1513-1432) (disponível online em http://www.sat.ait.ac.th/ej-sat/articles/1.2/bh-full.html)

Bond, A. and Gasser, L. (1988) Reading in Distributed Artificial Intelligence. Morgan Kaufmann.

Bongaerts, L. (1998) “Integration of Scheduling and Control in Holonic Manufacturing Systems”. PhD Thesis, Production and Automation Division, Katholieke Universiteit Leuven. Leuven, Belgium, December 1998.

Bongaerts, L.; Valckenaers, P.; Van Brussel, H. and Wyns, J. (1995) “Schedule Execution for a Holonic Shop Floor Control System”. In Proceedings of the Advanced Summer Institute (ASI’95). 24-28 June, 1995. Lisbon, Portugal.

Bongaerts, L.; Wyns, J.; Detand, J.; Van Brussel, H. and Valckenaers, P. (1996) “Identification of Manufacturing Holons”. In: S. Albayrak and S. Bussmann (Eds.) Proceedings of the 1^st European Workshop on Agent Oriented Systems in Manufacturing, pp.57-73. Berlin, Germany. September 1996.

Booch, G. (1991) Object Oriented Design with Applications, Benjamin/Cummings: Redwood City, California, USA.

Bradenburger, A. and Nalebuff, B. (1997) Co-opetion: 1. A Revolutionary Mindset that Redefines Competion and Cooperation; 2. The Game Theory Strategy That’s Changing the Game of Business. Doubleday. (ISBN: 0385479506)

Bradshaw, J. (1997a) “An Introduction to Software Agents”. In: J. Bradshaw (Ed.) Software Agents. AAAI/MIT Press. (ISBN: 0262522349)

Bradshaw, J. (1997b) “Software Agents: The Next Generation”. Tutorial at the 2^nd International Conference and Exhibition on The Practical Application of Intelligent Agents and Multi-Agent Technology (PAAM'97). London, UK. 21-23 April 1997.

Brewka, G. (1996) “Well-founded Semantics for Extended Logic Programs with Dynamic Preferences”. Journal of Artificial Intelligence Research, vol. 4, pp.19-36.

Britannica (URLa) “Automation”. Encyclopaedia Britannica Online, Britannica.com. http://www.britannica.com/bcom/eb/article/0/0,5716,117180+1,00.html

Britannica (URLb) “Frederick Taylor”. Encyclopaedia Britannica Online, Britannica.com. http://www.britannica.com/bcom/eb/article/7/0,5716,73317+1+71464,00.html

Britannica (URLc) “Machine Tool”. Encyclopedia Britannica Online, Britannica.com. http://www.britannica.com/bcom/eb/article/1/0,5716,115451+1,00.html

Britannica (URLd) “Great Depression”. Encyclopaedia Britannica Online, Britannica.com. http://www.britannica.com/bcom/eb/article/0/0,5716,38610+1+37849,00.html

Britannica (URLe) “Mass Production”. Encyclopaedia Britannica Online, Britannica.com. http://www.britannica.com/bcom/eb/article/4/0,5716,109274+1+106304,00.html

Britannica (URLf) “Industrial Relations”. Encyclopaedia Britannica Online, Britannica.com. http://www.britannica.com/bcom/eb/article/2/0,5716,43322+1,00.html

Britannica (URLg) “Work, History of the organization of – sophistication of mass production – scientific management”. Encyclopaedia Britannica Online, Britannica.com. http://www.britannica.com/bcom/eb/article/1/0,5716,115711+10,00.html

Bürckert, H.; Fisher, K. and Vierke, G. (1998) “Transportation scheduling with Holonic MAS – The TeleTruck Approach”. In H. Nwana and D. Ndumu (Eds.) Proceedings of the Third International Conference and exhibition on The Practical Application of Intelligent Agents and Multi-agent Technology (PAAM’97), pp.577-590. London, UK, May 23-25. (ISBN: 0952555484)

Bussmann, S. (1998) “An Agent-Oriented Architecture for Holonic Manufacturing Control”. In Proceedings of the First International Workshop on Intelligent Manufacturing Systems (IMSEurope’98), pp.1-12. Lausanne, Suíça, 15 a 17 de Abril de 1998.

Bussmann, S. and Müller, J. (1992) “A Negotiation Framework for Co-operating Agents”. In S. Deen (Ed.) Proceedings of CKBS-SIG, pp.1-17. Dake Centre, University of Keele, 1992.

Butala, P. and Sluga, A. (1998) “A Pace Toward a Distributed Manufacturing System”. In Proceedings of the First International Workshop on Intelligent Manufacturing Systems (IMS-Europe’98), pp.277-290. Lausanne, Suíça, 15 a 17 de Abril de 1998.

Camarinha-Matos, L.; Afsarmanesh, H.; Garita, C. And Lima, C. (1997) “Towards an Architecture for Virtual Entreprises”. In: L. Monostori (Ed.), Proceedings of the Second World Congress on Intelligent Manufacturing Processes & Systems (IMP&S’97), pp.531-541. Budapeste, Hungria, 10 a 13 de Junho de 1997.

Carriero, N. and Gelernter, D. (1989a) “Linda in Context”. Communications of the ACM, 32(4), 1989.

Carriero, N. and Gelernter, D. (1989b) “How to Write Parallel Programs: A Guide to the Perplexed”. ACM Computing Surveys, September 1989.

Castelfranchi, C. (1995). “Guarantees for Autonomy in Cognitive Agent Architecture”. In: Wooldridge, M. and Jennings, N. (Eds.) Intelligent Agents: Theories, Architectures, and Languages – Lecture Notes in Artificial Intelligence, vol. 890, pp.56-70. Springer-Verlag: Heidelberg, Germany.

Chang, T. and Wysk, R. (1985) An Introduction to Process Planning. Prentice-Hall, Inc.

Chen, F. and Su, C. (1996) “Vision-based Automated Inspection System in Computer Integrated Manufacturing”. The International Journal of Advanced Manufacturing Technology, 11(3):206-213.

Chiariglione, L. (URL) “FIPA Rationale”. Foundation for Intelligent Physical agents. http://www.cselt.it/fipa/fipa_rationale.htm

CMAF (URL) “What Do We Mean by ‘Agility’?”. Canadian Manufacturing Agility Forum. http://www.cmaf.com/info.html

Compton, W. (1988) Design and Analysis of Integrated Manufacturing Systems. National Academic Press: Washington DC, USA.

Cooper, S. and Taleb-Bendiad, A. (1997) “CONCENSUS: A Multi-Parties Negotiation Support for Conflict Resolution in Concurrent Engineering Design”. In: L. Monostori (Ed.), Proceedings of the Second World Congress on Intelligent Manufacturing Processes & Systems (IMP&S’97), pp.320-324. Budapeste, Hungria, 10 a 13 de Junho de 1997.

Courtois, A.; Pillet, M. e Martin, C. (1991) Gestão da Produção. LIDEL – Edições Técnicas, Lda.: Lisboa, Portugal.

Cox, W. e Alm, R. (1998) The Right Stuff: America’s Move to Mass Customization. Federal Reserve Bank of Dallas (1998 Annual Report). (disponível online em http://www.dallasfed.org/htm/pubs/annual/arpt98.html)

CVM (1999) Visionary Manufacturing Challenges for 2020. Committee on Visionary Manufacturing, National Research Council (Ed.). National Academic Press: Washington DC, USA. (disponível online em http://www.nap.edu/readingroom/books/visionary/index.html)

Davis, R. (1980) “Report on the Workshop on Distributed Artificial Intelligence”. SIGART Newsletter, nº 73, pp.42-52.

Davis, R. and Smith, R. (1983) “Negotiation as a Metaphor for Distributed Problem Solving”. Artificial Intelligence, vol. 20(1), pp.63-109.

Davis, S. (1987) Future Perfect. Addison-Wesley, Co.

Dertouzos, M.; Lester, R. and Solow, R. (1989) Made in America: Regaining the Productive Edge. MIT Press: Cambridge, MA, USA.

Dilworth, J. (1992) Operations Management – Design, Planning and Control for Manufacturing and Services. McGraw-Hill, Inc.

Drucker, P. (1994) “The Age of Social Transformation”. The Atlantic Monthly, November 1994. (disponível online em http://www.theatlantic.com/politics/ecbig/soctrans.htm)

Duffie, N.; Chitturi, R. and Mou, J. (1988) “Fault-tolerant Heterarchical Control of Heterogeneous Manufacturing System Entities”. Journal of Manufacturing Systems, vol. 7(4), pp. 315-328.

Durfee, E. and Rosenschein, J. (1994) “Distributed Problem Solving and Multi-agent Systems: comparisons and examples”. In: Proceedings of the 13^th International Distributed Artificial Intelligence Workshop, pp.94-104.

Durfee, E.; Lesser, V. and Corkhill, D. (1989) “Trends in Cooperative Distributed Problem solving”. IEEE Transactions on Knowledge and Data Engineering, vol. 1(1), pp.63-83.

EAF (URLa) European Agility Forum. http://www.agility-forum.de/

EAF (URLb) “Aims”. European Agility Forum. http://www.agility-forum.de/aim.html

Encarta (URLa) “Baruch, Bernard Mannes”. Microsoft Encarta Online Encycplopedia. http://encarta.msn.com/find/Concise.asp?z=1&pg=2&ti=761568198

Encarta (URLb) “Computer-Aided Design/Computer-Aided Manufacturing (CAD/CAM)”. Microsoft Encarta Online Encycplopedia.http://www.encarta.msn.com/find/Concise.asp?z=1&pg=2&ti=761577973#s1

Encarta (URLc) “Gore Vidal”. Microsoft Encarta Online Encycplopedia. http://encarta.msn.com/find/MediaMax.asp?pg=3&ti=761595762&idx=461542504

Encarta (URLd) “Mandelbrot, Benoit B.” Microsoft Encarta Online Encycplopedia. http://encarta.msn.com/find/Concise.asp?z=1&pg=2&ti=761579168

Ferber, J. (1993) “Modèle de Systèmes Multi-Agents: Du Réactif au Cognitive”. In: Proceedings of INFAUTOM'93, pp.26-56. Toulouse, France. 18-19 February 1993.

Ferreira, A. (1998) “Geração e Sequenciamento automático da Geometria das Áreas de Maquinagem”. Dissertação de Mestrado, Universidade Portucalense Infante D. Henrique. Maio de 1998.

Figueiredo, L. (1996) “Conversão e Execução de Planos de Processo”. Dissertação de Mestrado. Faculdade de Engenharia, Universidade do Porto. Novembro de 1996.

Finn, T.; Labrou, Y. and Mayfield, J. (1997) “KQML as an Agent Communication Language”. In: Bradshaw, J. (Ed.) Software Agents. AAAI Press/MIT Press. (ISBN: 0-262-52234-9) (dísponivel online em http://www.cs.umbc.edu/kqml/papers/)

Fischer, K. (1999) “Agent-Based Design of Holonic Manufacturing Systems”. Journal of Robotics and Autonomous SystemsElsevier Science. (disponível online em http://www.dfki.de/~kuf/index.html)

Fischer, K.; Müller, J.; Heimig, I. and Scheer, A. (1996) “Intelligent Agents in Virtual Enterprises”. Proceedings of the First International Conference on The Practical Application of Agents and Multi-Agent Technologies (PAAM’96), pp.205-223. Londres, Reino Unido, 22 a 24 de Abril de 1996.

FOLDOC (URLa) “Agent”. The Free Online Dictionary of Computing. http://www.instantweb.com/~foldoc/foldoc.cgi?query=agent

FOLDOC (URLb) “Computer Aided Engineering”. The Free Online Dictionary of Computing. http://www.instantweb.com/~foldoc/foldoc.cgi?Computer+Aided+Engineering

FOLDOC (URLc) “Manufacturer Resource Planning”. The Free Online Dictionary of Computing. http://www.instantweb.com/~foldoc/foldoc.cgi?Manufacturer+Resource+Planning

FOLDOC (URLd) “Manufacturing Automation Protocol”. The Free Online Dictionary of Computing. http://www.instantweb.com/~foldoc/foldoc.cgi?Manufacturing+Automation+Protocol

FOLDOC (URLe) “MRP”. The Free Online Dictionary of Computing. http://www.instantweb.com/~foldoc/foldoc.cgi?query=mrp

Foner, L. (1997) “Entertainmnet Agents: A Sociological Case Study”. Proceedings of the First International Conference on Autonomous Agents (Agents’97). Marina del Rey, CA. 6-8 February 1997. (disponível online em http://foner.www.media.mit.edu/people/foner/Julia/Julia.html)

Fordyce, K.; Dunki-Jacobs, R.; Gerard, B.; Sell, R. and Sullivan, G. (1992) “Logistics Management System: An Advanced Decision Support System for the Fourth Decision Tier Dispatch or Short-Interval Scheduling”. Production and Operations Management, vol. 1(1), pp.70-86.

Franklin, S. and Graesser, A. (1997) “Is it an Agent, or Just a Program? a taxonomy for autonomous agents”. In: Müller, J.; Wooldridge, M. and Jennings, N. (Eds.) Intelligent Agents III – Agents Theories, Architectures and Languages. Lecture Notes in Artificial Intelligence, vol. 1193, pp.21-35. Springer-Verlag. Berlin, Germany. (ISBN 3-540-62507-0) (disponível online em http://www.msci.memphis.edu/~franklin/AgentProg.html)

Frazer, J. and Oppenheim, J. (1997) “What's New About Globalization”. The McKinsey Quarterly, nº 2, p.172.

Gantt, H. (1919) Organising for Work. Harcourt, Brace and Howe, New York.

Garey M. and Johnson, D. (1979) Computers and Intractability: A Guide to the Theory of NP-Completeness. W.H. Freeman: San Francisco.

Gasser, B.; Braganza, C. and Hermann, H. (1987) “MACE: A Flexible Testbed for Distributed AI Research”. In: M. Huhns (Ed.) Distributed Artificial Intelligence, pp.119-152. Pitman Publishing: London.

Genesereth, M. and Ketchpel, S. (1994). “Software Agents”. Communications of the ACM, 37(7):48-53.

Gentia (1997) “Agents Explained”. Gentia Software Whitepaper.

Gerber, C.; Slekmann, J. and Vlerke, G. (1999) “Holonic Multi-Agent Systems”. DFKI Research Report RR-99-03. May 12, 1999. (disponível online em http://www.dfki.uni-kl.de/dfkidok/publications/RR/99/03/abstract.html)

Gini, M. and Boddy, M. (Eds.) (1998) Working notes of the workshop on Agent Based Manufacturing at the Second International Conference on Autonomous Agents (Agents’98). Minneapolis/Saint Paul, Minnesota, EUA, 9 a 13 de Maio de 1998.

Glistau, E. (1996) “Comparison to Other Concepts”. In: S. Albayrak and S. Bussmann (Eds.) Proceedings of the 1^st European Workshop on Agent Oriented Systems in Manufacturing, p.185. Berlin, Germany. September 1996.

GM (WP) “Agent Based Manufacturing”. White paper. General Motors Corporation.

Good, M. (1994) “Keynote Address”. North American Symposium - Preparing for the Full-Scale IMS Program. Dallas, Texas, USA, June 24, 1994. http://ksi.cpsc.ucalgary.ca/IMS/Dallas/IMS_Good.html

Gou, L. and Luh, P. (1997) “Holonic Manufacturing Scheduling: Architecture, Cooperation Mechanism, and Implementation”. In Proceedings of IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Tokyo, Japan. 16-20 June 1997. (disponível online em http://www.eng2.uconn.edu/msl/paper/ling-HMS/ paper.html)

Gould, P. (1997) “What is Agility?”. IEE Manufacturing Engineer, pp.28-31. February 1997. Institution of Electrical Engineers, UK.

Green, S.; Hurst, L.; Nangle, B.; Cunningham, P.; Somers, F. and Evans, R. (1997) “Software Agents: A Review”. Intelligent Agents Group Report. (disponível online em http://www.cs.tcd.ie/research_groups/aig/iag/toplevel2.html)

Grehan, R. (1994) “Good things in small packages are generating big product opportunities”. BYTE Magazine. September 1994. (disponível online em http://www.byte.com/art/9409/sec6/art5.htm)

Groover, M. (1987) Automation, Production Systems and Computer Integrated Manufacturing. Prentice-Hall, Inc.:Englewood Clifs, New Jersey.

Groover, M. and Zimmers (jr.), E. (1984) CAD/CAM Computer Aided Design and Manufacturing. Prentice Hall, Inc.: Englewood Clifs, New Jersey.

Haddadi, A. (1995) Communication and Cooperation in Agent Systems. Lecture Notes in Artificial Intelligence, vol.1056. Springer-Verlag: Germany. (ISBN 3-540-61044-8)

Hahndel, S.; Fuchs, F. and Levi, P. (1994) “Distributed Negotiation-Based Task Planning for a Flexible Manufacturing Environment”. In: Proceedings of the 6^th European workshop on modelling autonomous agents in a multi-agent world, pp.147-158. Odense, Denmark.

Hatvani, J. (1983) “The efficient Use of Deficient Knowledge”. Annals of the CIRP, vol. 32(1), pp.423-425.

Hatvani, J. and Nemes, L. (1978) “Intelligent Manufacturing Systems – A Tentative Forecast”. In: A. Niemi (Ed.) Proceedings of the VII^th IFAC World Congress, vol. 2, pp.895-899. June 12-16. Helsinki, Finland.

Hayashi, H. (1993) “The IMS International Collaborative Program”. In: Proceedings of the 24th International Symposium on Indústrial Robots. Japan Indústrial Robot Association, 1993.

Hayes, C. (1998) “MAAP: An Agent Organization for Process Planning”. In: Gini, M. and Boddy, M. (Eds.) Working notes of the workshop on Agent Based Manufacturing at the Second International Conference on Autonomous Agents (Agents’98), pp.41-46. Minneapolis/Saint Paul, Minnesota, EUA, 9 a 13 de Maio de 1998.

Hayes, R.; Wheelwright, S. and Clark, K. (1988) Dynamic Manufacturing: Creating the Learning Organisation. Free Press: New York, USA.

Hayes-Roth, B. (1995) “An Architecture for Adaptive Intelligent Systems”. Artificial Intelligence: Special Issue on Agents and Interactivity, vol. 72, pp.329-365, 1995. (disponível online em http://www-ksl.stanford.edu/KSL_Abstracts/KSL-93-19.html)

Hazdra, T. and Pechoucek, M. (1999) “ProPlanT – A Multi-Agent System for Operative Planning of Production”. In Proceedings of The Fourth International Conference on The Practical Application of Agents and Multi-Agent Technologies (PAAM’99), pp.345-362. Londres, Reino Unido, 19 a 21 de Abril de 1999. (ISBN 1-902426-05-3)

Heikkilä T.; Agostino N.; Rannanjärvi L. and Salonen P. (1999) “Feature-Based Product Modelling for Holonic Shot Blasting Systems”. Proceedings of the IEEE/IMACS CCSC Multiconference. Athens, Greece, 4-8.July.1999.

HMSC (URL) “HMS Questions and Answers”. Holonic Manufacturing Systems Consortium. http://hms.ifw.uni-hannover.de/public/FAQ/fr_faq.htm

Holland, J. (1975) Adaptation in natural and artificial systems. University of Michigan Press, 2^nd edition, 1992.

Höpf, M. (1994) “Holonic Manufacturing Systems – The Basic Concept and a Report of IMS Test Case 5”. In: J. Knudesen et al. (Eds.), Sharing CIM Solutions. IOS Press. (disponível online em http://hms.ifw.uni-hannover.de/public/Feasibil/holo2.htm)

Hunt, V. (1989) Computer-Integrated Manufacturing Handbook. Chapman & Hall. March, 1989. (ISBN 0412016516)

IMS (URL) “Introduction to IMS – Structure of IMS”. Intelligent Manufacturing Systems Organization. http://www.ims.org/intro/intro.htm.

IMS98 (1998) Proceedings of the First International Workshop on Intelligent Manufacturing Systems (IMS-Europe’98). Lausanne, Suíça, 15 a 17 de Abril de 1998.

ISC (1994) “IMS: Intelligent Manufacturing Systems – A Program for International Cooperation in Advanced Manufacturing”. International Steering Committee Final Report adopted at ISC6. Hawaii, USA. 24-26 January 1994. http://ksi.cpsc.ucalgary.ca/IMS/ISC/ISC94_Contents.html

Jacobson, I. (1992) Object-Oriented Software Engineering, Addison-Wesley Readings: Massachusetts, USA.

Jennings, N. Sycara, K. and Wooldridge, M. (1998) “A Roadmap of Agent Research and Development”. Journal of Autonomous Agents and Multi-Agent Systems, vol. 1, pp.275-306. Kluwer Academic Publishers, The Netherlands.

Kádár, B.; Monostori, L. and Szelke, S. (1998) “An Object-oriented Framework for Developing Distributed Manufacturing Architectures”. Journal of Intelligent Manufacturing – special issue on Agent Based Manufacturing, vol. 9(2), pp.173-179. Chapman & Hall. (ISSN 0956-5515)

Kalpakjian, S. (1995) Manufacturing Engineering and Technology. Third edition. Addison-Wesley Publishing Company. (ISBN: 0-201-84552-0)

Kanchanasevee, P.; Biswas, G. Kawamura, K. and Tamura, S. (1997) “Contract-Net Based Scheduling for Holonic Manufacturing Systems”. Proceedings of SPIE “Architectures, Networks and Intelligent Systems for Manufacturing Integration”, pp.108-115. 15-16 October. Pittsburgh, Pennsylvania.

Kaupunginkirjasto, K. (1999) “Arthur Koestler”. http://www.kirjasto.sci.fi/koestler.htm

Kelley, R. (1999) How to Be a Star at Work : 9 Breakthrough Strategies You Need to Succeed. Times Books. (ISBN: 0812931696)

Kelly, K. (1998) New Rules for the New Economy: 10 Radical Startegies for a Connected World. Penguin: USA. October 1999. (ISBN: 014028060X)

Kidd, P. (2000) “Next Generation Manufacturing Enterprise Model”. http://www.cheshirehenbury.com/agility/ngmemodel.html. September 2000.

Kirsch, D.; Wieczorek, D. and Albayrak, S. (1998) “Open Agent Architecture for the Realization of Holonic Manufacturing Systems”. In Proceedings of the First International Workshop on Intelligent Manufacturing Systems (IMS-Europe’98), pp.1-12. Lausanne, Suíça, 15 a 17 de Abril de 1998.

Koestler, A. (1967) The Ghost in the Machine. Hutchinson & Co: London.

Kollingbaum, M.; Heikkilä, T.; Peeters, P.; Matson, J.; Valckenaers, P.; McFarlane, D. and Bluemink, G. (2000) “Emergent flow shop control based on MASCADA agents”. Proceedings of IFAC Symposium On Manufacturing, Modeling, Management And Control (MIM2000). July 12-14, 2000, Patras, Greece.

Kopacek, P. (ed.) (1999) First IFAC Workshop on Multi-Agent Systems in Production (MAS’99). December 2-4, 1999. Vienna, Austria.

Korper, S.; Ellis, J. and Gibson, J. (1999) The E-Commerce Book: Building the E-Empire. Academic Press. (ISBN: 0124211607)

Kouiss, K.; Pierreval, H. and Mebarki, N. (1997) “Using Multi-Agent Architecture in FMS for Dynamic Scheduling”. Journal of Intelligent Manufacturing, vol. 8, pp.41-47. Chapman & Hall.

Kusiak, A. (1990) Intelligent Manufacturing Systems. Prentice-Hall, Inc.

Lamma, E.; Moniz Pereira, L. and Riguzzi, F. (1998) “Learning with extended logic programs”. Proceedings of International Workshop On Non-Monotonic Reasoning at KR'98, pp.99-108. Trento, Italy, May 30-June 1.

Langer, G. (1999) “HoMuCS: A Metodology and Architecture for Holonic Multi-cell Control Systems”. PhD Thesis. Technical University of Denmark, Department of Manufacturing Engineering. January 1999.

Larouse (1995) Enciclopédia Visual e Temática. Selecções do Reader’s Digest: Lisboa, Portugal. Janeiro de 1995.

Laverty, J. e Demeestère, R. (1993) Controlo de Gestão nas Empresas Industriais. LIDEL – Edições Técnicas, Lda. : Lisboa, Portugal.

Li, R. and Moniz Pereira, L. (1997) “Knowledge-Based Situaded Agents Among Us: Apreliminary Report”. In: Müller, J.; Wooldridge, M. and Jennings, N. (Eds.) Intelligent Agents III - Lecture Notes in Artificial Intelligence, vol. 1193, pp.375-389. Springer-Verlag. Berlin, Germany. (ISBN 3-540-62507-0)

Lin, G. and Solberg, J. (1992) “Integrated Shop Flor Control Using Autonomous Agents”. IIE Transactions, vol. 24(3), pp.57-71. July 1992.

Lomuscio, A. and Colombetti, M. (1997) “QLB: A Quantified Logic for Belief”. In J. Müller, M. Wooldridge and N. Jennings (Eds.) Intelligent Agents III – Agents Theories, Architectures and Languages. Lecture Notes in Artificial Intelligence, vol. 1193, pp.71-85. Springer-Verlag. Berlin, Germany. (ISBN 3-540-62507-0)

Machado, J. e Neves, J. (1992) “Lógica Computacional – Volume I”. Unidade de ensino da Universidade do Minho. Departamento de Informática. Braga, Portugal.

Maes, P. (1994) “Modeling Adaptive Autonomous Agents”. Artificial Life Journal, vol. 1, n.º 1 & 2, pp.135-162, MIT Press, 1994.

Maley, J. (1988) “Managing the Flow of Intelligent Parts”. Robotics and Computer-Integrated Manufacturing, vol. 4(3/4), pp.525-530.

Malone, T. and Crowston, K. (1994) “The Interdisciplinary Study of Co-ordination”. ACM Computing Surveys, vol. 26(1), pp.87-119. March 1994.

Martin, J. (1997) “Give ’em exactly what they want”. Fortune. November 10, 1997.

Maturana, F. and Norrie, D. (1996) “Multi-Agent Architecture for Distributed Manufacturing”. Journal of Intelligent Manufacturing, vol. 7, pp.257-270.

McFarlane, D.; Marett, B.; Elsley, G.; Jarvis, D.; Wilbers, P. (1995) “Application of Holonic Methodologies to Problem Diagnosis in a Steel Rod Mill”.In IEEE Int. Conference on Systems, Man and Cybernetics.

McHugh, P.; Merli, G. and Wheeler III, W. (1995) Beyond Business Process Reengineering: Towards the Holonic Enterprise. John Wiley & Sons: USA. (ISBN: 0-471-95087-4)

Merchant, M. (1988) “The Percepts and Sciences of Manufacturing” Robotics & Computer Integrated Manufacturing, vol. 4(1/2), pp.1-6, 1988.

Merrian-Webster (URLa). “agent”. Merrian-Webster Online Dictionary. http://www.m-w.com/cgi-bin/dictionary?agent

Merrian-Webster (URLb). “competing”. Merrian-Webster Online Dictionary. http://www.m-w.com/cgi-bin/dictionary?competing

Merrian-Webster (URLc). “coordinating”. Merrian-Webster Online Dictionary. http://www.m-w.com/cgi-bin/dictionary?coordinating

MESA (URL) “MESA International Glossary of Terms”. Manufacturing Execution Systems Association. http://www.mesa.org/html/main.cgi?sub=82

Monostori, L. (1997) “Editorial”. In: L. Monostori (Ed.), Proceedings of the Second World Congress on Intelligent Manufacturing Processes & Systems (IMP&S’97), pp.vi-vii. Budapeste, Hungria, 10 a 13 de Junho de 1997.

Morley, R. and Schelberg, C. (1993) “An Analysis of a Plant-Specific Dynamic Scheduler”. Proceedings of the NSF Workshop on Dynamic Scheduling. Cocoa Beach, FL, USA.

Nagel and Dove (1991) “21st Century Manufacturing Enterprise Strategy”. Iaccocca Institute Bethlehem P.A., 1991.

NCMS (1996) “NCMS Collaborative Manufacturing Agenda”. National Center for Manufacturing Sciences. NCMS Document 0040RE96, May 1996.

Neves, J. (1984) “A Logic Interpreter to Handle Time and Negotiation in Logic Databases”. In: Proceedings of the ACM 1984 Annual Conference. San Francisco, California, USA.

Neves, J. e Machado, J. (1997) “Rapid Prototyping in Concurrent Engineering – A Model and its Language”. In: Proceedings of the International Conference on Concurrent Engineering and Electronic Design Automation. Erlangen, Germany. March 1997.

Neves, J.; Machado, J.; Analide, C.; Novais, P. and Abelha, A. (1997) “Extended Logic Programming Applied to the Specification of Multi-Agent Systems and Their Computing Environment”. In: Proceedings of the 1997 IEEE International Conference on Intelligent Processing Systems. Beijing, China.

NGM (1997) Next Generation Manufacturing – A Framework for Action, vol. I, “Summary Report”. Next Generation Project Report, Agility Forum, January 1997. (disponível online em http://imtr.ornl.gov/NGM/ngmhome.html e disponível para download em http://www.dp.doe.gov/dp_web/next_gen.htm)

Nilsson, N. (1981) “Distributed Artificial Intelligence”. Report SRI International, Menlo Park, CA.

NRC (1986) Towards a New Era in Manufacturing: The Need for a National Vision. National Research Council, Manufacturing Studies Board (Ed.). National Academic Press: Washington DC, USA.

NRC (1990) Research Directions and Needs in US Manufacturing. National Research Council, Manufacturing Studies Board Draft.

Nwana, H. (1996) “Software Agents: A Review”. Knowledge Engineering Review, vol. 11(3), pp.1-40, September 1996. (disponível online em http://www.cs.umbc.edu/paperrs/ao.ps)

Nwana, H.; Lee, L. and Jennings, N. (1996) “Coordination in software agent systems”. BT Technology Journal, 14(4), pp.79-88. October 1996.

Okino, N. (1989) “Bionical Manufacturing Systems”. In: T. Sata (Ed.) Organisation of Engineering Knowledge for Product Modelling in Computer Integrated Manufacture, pp.65-81. Elsevier: The Netherlands.

Okino, N. (1993) “Bionic Manufacturing System”. In: J. Peklenik (Ed.) CIRP, Flexible Manufacturing Systems Past-Present-Future, pp.73-95.

Osborne, M. and Rubinstein, A. (1994) A Course in Game Theory. MIT Press.

Parker, M. (1997) “Common Problems”. IEE Manufacturing Engineer, pp.10-11. February 1997. Institution of Electrical Engineers, UK.

Parunak, H (1987) “Manufacturing Experience With the Contract Net”. In: M. Huhns (ed.) Distributed Artificial Intelligence, pp.285-310. Pitman Publishing: London.

Parunak, H. (1991) “Characterizing the Manufacturing Scheduling Problem”. Journal of Manufacturing Systems, vol. 10(3), pp.241-258.

Parunak, H. (1996) “Applications of Distributed Artificial Intelligence in Industry”. In: O’Hare and Jennings (Eds.) Foundations of Distributed Artificial Intelligence, chapter 4. Wiley Inter-Science.

Parunak, H. (1998a) “What Can Agents Do in Industry and Why?”. In: Proceedings of the Second International Conference on Co-operative Information Agents (CIA'98). Paris, France. 3-8 July 1998.

Parunak>, H. (1998b) “The DASCh Experience: How to Model a Supply Chain”. Proceedings of International Conference on Computer Science (ICCS’98). (disponível online em http://www.erim.org/~vparunak/papers.htm)

Parunak, H. (1999) “Agents While You Wait”. Tutorial presented at 4^th International Conference on the Practical Application of Intelligent Agents and Multi-Agent Technology (PAAM’99). London, UK, 29 April 1999.

Parunak, H.; Baker, A. and Clark, S. (1997). “The AARIA Agent Architecture”. In: Proceedings of the 1^st International Conference on Autonomous Agents (Agents'97). Marina del Rey, CA. 6-8 February 1997. (disponível online em http://www.aaria.uc.edu/paper.html)

Parunak, H.; Ward, A.; Fleischer, M. and Sauter, J. (1999) “The RAPPID Project: Symbiosis Between Industrial Requirements and MAS Research”. Journal of Autonomous Agents and Multi-Agent Systems, vol. 2(2), pp.111-140. June 1999.

PDMIC (URL) “Glossary of Product Data Management Related Terms”. Product Data Management Information Center. http://www.pdmic.com/glossary/

Pine, B.; Davis, S. and Pine II, B. (1999) Mass Customization: The New Frontier in Business Competition. Harvard Business School Press: USA. (ISBN: 0875849466)

Pontrandolfo, P. and Okogbaa, O. (1999) “Global Manufacturing: A Review and a Framework for Planning in a Global Corporation”. International Journal of Production Research, vol. 37(1), pp.1-19.

Porto Editora (URLa) “agente”. Dicionário On-Line. Porto Editora, Lda. http://www.portoeditora.pt/dol/dicio_corpo.asp?operacao=def&palavra=agente

Porto Editora (URLb) “hierarquia”. Dicionário On-Line. Porto Editora, Lda. http://www.portoeditora.pt/dol/dicio_corpo.asp?operacao=def&palavra=hierarquia

Rabelo, R. and Camarinha-Matos, L. (1994) “Negotiation in Multi-Agent Based Dynamic Scheduling”. Robotics & Computer Integrated Manufacturing, vol. 11(4), pp.303-309. Elsevier Science Ltd.

Rabon, L. and Scheller, H. (1997) “Mass Customization Making Progress”. Bobbin, September 1997. Bobbin Group. (disponível online em http://www.bobbin.com/media/97sept/mc.htm)

Ramos, C.; Almeida, A. and Vale, Z. (1995) “Scheduling Manufacturing Tasks considering Due Dates: a new method based on Behaviours and Agendas”. In: International Conference on Indústrial and Engineering Applications of Artificial Intelligence and Expert Systems, pp.745-751. Melbourne, Australia.

Ramos, C.; Rocha, J. and Vale, Z. (1998) “On the complexity of Precedence Graphs for Assembly and Task Planning”. Computers in Industry, vol. 36, pp.101-111. Elsevier.

Rannanjärvi, L. and Heikkilä, T. (1998) “Software Development for Holonic Manufacturing Systems”. Computers in Industry, vol.37, pp.233-253. Elsevier.

RCBI (1998) “Trends in Manufacturing”. Technology Update, (RCBI Newsletter), Spring 1998. Robert C. Byrd Institute for Advanced Flexible Manufacturing. (disponível online em http://www.rcbi.org/rcbi/update/spring98/trendsmfg.htm)

Rembold, U. (1994) Computer Integrated Manufacturing and Engineering. Addison-Wesley.

Riggs, J. (1987) Production Systems: Planning, Analysis and Control. John Wiley & Sons, Inc.

Riley, L. and Cox, L. (1998) “Computer Integrated Manufacturing: Challenges and Barriers to Implementation”. The Technology Interface, vol. 2(2), (Winter 98). (disponível online em http://et.nmsu.edu/~etti/winter98/manufacturing/riley/riley.html)

Rocha, J. (1999) “Representação, Análise da Complexidade, Planeamento e Execução de Processos Indústriais”. Tese de Doutoramento. Faculdade de Engenharia, universidade do Porto. Dezembro de 1999.

Rumbaugh J.; Booch, G. and Jacobson, I. (1997) The Unified Modelling Language (UML) ver. 1.0. Rational Co.: California, USA.

Rumbaugh, J.; Blaha, M.; Premerlani, W.; Eddy, F. and Lorensen, W. (1991) Object-Oriented Modelling and Design. Prentice Hall: Englewood Cliifs.

Russell, S. and Norvig, P. (1995) Artificial Intelligence: a modern approach. Prentice Hall: New Jersey, USA. (ISBN:0-13-103805-2)

Sadeh, N. (1994) “Micro-Opportunistic Scheduling: The Micro-Boss Factory Scheduler”. In: M. Fox and M. Zweben (Eds.) Intelligent Scheduling. Morgan Kaufmann, 1994.

Samadhi, T.; Ari, M. and Hoang, K. (1995) “Shared Computer-Integrated Manufacturing for Various Types of Production Environment”. International Journal of Operations & Production Management, vol. 15(5), pp.95-109.

Sandholm, T. and Lesser, V. (1996) “Advantages of a Leveled commitment Contracting Protocol”. Proceedings of the Thirteenth National Conference on Artificial Intelligence (AAAI-96), pp. 126-133. Portland, OR, USA.

Santos, M. (1999) “Sistemas de Classificação em Ambientes Distribuídos”. Tese de Doutoramento. Escola de Engenharia, Universidade do Minho. 1999.

Sargent, P. (1992) “Back to school for a brand new ABC”. The Guardian, 12 March, p.28.

Sauter, J. and Parunak, H. (1999) “ANTS In The Supply Chain”. Workshop on Agent based Decision Support for Managing the Internet-Enabled Supply Chain (Agents’99). Seattle, WA, 1 May 1999.

Schonfeld, E. (1998) “The Customized, Digitized, Have-it-your-way Economy”. Fortune. Sepetember 28, 1998.

Schroeder, M.; Móra, I. and Moniz Pereira, L. (1997) “A deliberative and Reactive Diagnosis Agent Based on Logic Programming”. In: Müller, J.; Wooldridge, M. and Jennings, N. (Eds.) Intelligent Agents III – Agents Theories, Architectures and Languages. Lecture Notes in Artificial Intelligence, vol. 1193, pp.293-307. Springer-Verlag. Berlin, Germany. (ISBN 3-540-62507-0)

Schwartz, E. (1997) Webnomics: Nine Essential Principles for Growing Your Business on the World Wide Web. Broadway Books. (ISBN: 0553061720)

Seidman, A. (1995) “Computer-Integrated Manufacturing: An Opportunity Missed”, IIE Solutions, vol. 27(8), (August 1995), pp.8-9.

Shen, W. and Norrie, D. (1998) “Combining Mediation and Bidding Mechanisms for Agent-Based Manufacturing Scheduling”. In Proceedings of the 2^nd International conference on Autonomous Agents (Agents'98), pp.469-470. Minneapolis/St Paul, USA. 9-13 May 1998.

Shen, W. and Norrie, D. (1999) “Agent-Based Systems for Intelligent Manufacturing: A state-of-the-Art Survey”. Knowledge and Information Systems, 1(2):129-156. (disponível online em http://www.acs.ucalgary.ca/~wshaen/papers/survey-abm.htm)

Sihn, W. (1997) “The Fractal Factory: A Practical Approach to Agility in Manufacturing”. In: L. Monostori (Ed.) Proceedings of The Second World Congress On Intelligent Manufacturing Processes & Systems, pp.617-621, Budapest, Hungary, June 10-13, 1997

Simon, H. (1962) “The Architecture of Complexity”. Proceedings of the American Philosophy Society, vol. 106(6), 1962.

Simon, H. (1969) The Sciences of the Artificial. MIT Press: Cambridge, Massachusetts.

Skiena, S. (1997) The Algorithm Design Manual. Springer-Verlag: New York.

Smith, J.S., Hoberecht, W.C. and Joshi, S.B. (1996). “A Shop Floor Control Architecture for Computer Integrated Manufacturing”. IIE Transactions, 28(10), pp.783-794.

Smith, R. (1980) “The Contract Net Protocol”. IEEE Transactions on Computers, vol. C-29(12).

Solberg, J. and Kashyap, R. (1993) “ERC Research in Intelligent Manufacturing Systems”. Proceedings of the IEEE, vol. 81(1), pp.25-41. January 1993.

Sousa, P. and Ramos, C. (1997) “Proposal of a Scheduling Holon for Manufacturing”. In Proceedings of Second International Conference on The Practical Application of Agents and Multi-Agents Technologies (PAAM’97), pp.255-268. Londres, Reino Unido, 21 a 23 de Abril de 1997. (ISBN 0-952554-6-8)

Sousa, P. and Ramos, C. (1998) “A Dynamic Scheduling Holon for Manufacturing Orders”. Journal of Intelligent Manufacturing – special issue on Agent Based Manufacturing, vol. 9(2), pp.107-112. Chapman & Hall. (ISSN 0956-5515)

Sousa, P. and Ramos, C. (1999), “A Distributed Architecture and Negotiation Protocol for Scheduling in Manufacturing Systems”. Computers in Industry - special issue on Life Cycle Approaches to Production Systems: Management, Control and Supervision, vol. 38(2), pp.103-113. Março de 1999. Elsevier, Holanda. (ISSN 0166-3615)

Sousa, P.; Ramos, C. and Neves, J. (1999), “Contracting Tasks Between Autonomous Resources – An application to dynamic scheduling of manufacturing orders”. In Proceedings of The Fourth International Conference on The Practical Application of Agents and Multi-Agent Technologies (PAAM’99), pp.345-362. Londres, Reino Unido, 19 a 21 de Abril de 1999. (ISBN 1-902426-05-3)

Sousa, P.; Ramos, C. e Neves, J. (2000a), Fabricare: An Integrated View of a Distributed Manufacturing System”. In: E. Pagello, F. Groen, T. Arai, R. Dillmann and A. Stentz (Eds.) Proceedings of the 6^th International Conference on Intelligent Autonomous Systems (IAS-6), pp.423-428. Veneza, Itália, 25 a 27 de Julho de 2000.

Sousa, P.; Ramos, C. e Neves, J. (2000b), “Manufacturing Entities with Incomplete Information”. Studies in Informatics and Control Journal, vol. 9(2), pp.79-88, June 2000. National Institute for R&D in Informatics. Roménia.

Sousa, P.; Silva, N.; Heikkila, T.; Kallingbaum, M. and Valcknears, P. (2000c), “Aspects of Co-operation in Distributed Manufacturing Systems”. Studies in Informatics and Control Journal, vol. 9(2), pp.89-110, June 2000. National Institute for R&D in Informatics. Roménia.

Stuart, A. (1996) “Five Uneasy Pieces: Part 2 – Knowledge Management”. CIO Magazine, June 1996. (disponível online em http://www.cio.com/archive/060196_uneasy_1.html)

Suppes, P. and Hill, S. (1963) First Course in Mathematical Logic. Blaisdell Publishing Company, New York, USA.

Sycara, K. (1990) “Negotiation Planning: An AI Approach”. European Journal of Operational Research, vol. 46, pp.216-234.

Sycara, K., (1989) “Multi-agent Compromise via Negotiation”. In: L. Gasser & M. Huhns (Eds.), Distributed Artificial Intelligence 2. Morgan Kaufmann, 1989.

Sycara, K.; Roth, S.; Sadeh, N. and Fox, M. (1991) “Coordinating Resource Allocation in Distributed Factory Scheduling”. IEEE Expert, vol. 6(1) pp. 29-40. February, 1991.

Tapscott, D. and Caston, A. (1993) Paradigm Shift – The New Promise of Information Technology. McGraw-Hill, Inc.:New York.

Tharumarajah, A.; Wells, A. and Nemes, L. (1996) “Comparison of the Bionic, Fractal and Holonic Manufacturing Concepts”. International Journal of Computer Integrated Manufacturing, vol. 9(3), pp.217-226. Taylor & Francis Ltd.

Thurow, L. (1997) The Future of Capitalism: How Today's Economic Forces Shape Tomorrow's World. Penguin:USA (ISBN: 0140263284)

Traylor, B. and Gelfond, M. (1993) “Representing Null Values in Logic Programming”. In: Proceedings of the International Logic Symposium (ILPS’93). Vancouver, British Columbia, Canada.

Ueda, K. (1992) “A Concept for Bionic Manufacturing Systems Based on DNA-type Information”. In: G. Olling and F. Kimura (Eds.) Human Aspects in Computer Integrated Manufacturing, pp.853-863.

Ueda, K. (1994) Biological Manufacturing Systems. Kogyochosakai Pub. Co.:Tokyo.

Ueda, K. and Vaario, J. (1997) “The Biological Manufacturing System: Adaptation to Growing Complexity and Dynamics in Manufacturing Environment”. New Manufacturing Era, 29^th CIRP International Seminar on Manufacturing Systems, pp.39-44. Osaka, Japan.

Ulieru, M.; Stefanoiu, D. and Norrie, D. (2000) “Holonic Reconfiguration of Manufacturing Production by Fuzzy Multi-Agent Modelling”. In: E. Pagello, F. Groen, T. Arai, R. Dillmann and A. Stentz (Eds.) Proceedings of the 6^th International Conference on Intelligent Autonomous Systems (IAS-6), pp.543-548. Veneza, Itália, 25 a 27 de Julho de 2000.

USC (1990) “Making things better: Competing in Manufacturing”. OTA-ITE-443. United States Congress, Office of Technology Assessment. US Government Printing Office: Washington DC.

Valckenaers, P. and Van Brussel, H. (URL) “IMS TC5: holonic Manufacturing Systems Technical Overview”. http://hms.ifw.uni-hannover.de/public/Intro/fr_tech.htm

Valckenaers, P.; Bonneville, F.; Van Brussel, H.; Bongaerts, L. and Wyns, J. (1994a) “Results of the Holonic Control System Benchmark at K.U. Leuven”. In Proceedings of International Conference on Computer Integrated Manufacturing and Automation Technology, pp.128-133. Rensselaer Polytechnic Institute, Troy, NY, 10-12 October 1994.

Valckenaers, P.; Van Brussel, H.; Bongaerts, L. and Wyns, J. (1997) “Holonic Manufacturing Systems”. Journal of Integrated Computer Aided Engineer, vol. 4(3), pp.191-201. John Willey & Sons, Inc.

Valcknears, P.; van Brussel, H.; Bonneville, F.; Bongaerts, L. and Wyns, J. (1994b) “IMS Test Case 5: Holonic Manufacturing Systems”. IMS workshop at IFAC'94. Vienna, Austria, June 13-15.

Van Brussel, H. (1995) “>Working Group Proposal on Intelligent Manufacturing Systems”. Document submitted to the Fourth Framework Programme of EC.

van Brussel, H. and Valckenaers, P. (Eds.) (1999) Proceedings of the Second International Workshop on Intelligent Manufacturing Systems (IMS'99). Leuven, Bélgica, 22 a 24 de Setembro de 1999. (ISBN 90-73802-69-5)

Van Brussel, H.; Wyns, J.; Valckenaers, P.; Bongaerts, L.; and Peeters, P. (1998). “Reference Architecture for Holonic Manufacturing Systems: PROSA”. Computers in Industry - special issue on Intelligent Manufacturing Systems, vol. 31(3), pp.255-276. 1998. Elsevier Science B.V.

Van Leeuwen, E. and Norrie, D. (1997) “Holons and Holarchies”. IEE Manufacturing Engineer, pp.86-88. April 1997. Institution of Electrical Engineers, UK.

Váncza, J. and Márcus, A. (1998) “Holonic Manufacturing with Economic Rationality”. In Proceedings of the First International Workshop on Intelligent Manufacturing Systems (IMS-Europe’98), pp.1-12. Lausanne, Suíça, 15 a 17 de Abril de 1998.

Verbo (URLa) “agente”. Dicionário Enciclopédico Verbo. Mind-Verbo & Novis.http://enciclopediaverbo.clix.pt/cgi-bin/consulta.cgi?artigo=agente

Verbo (URLb) “Guerra Mundial”. Dicionário Enciclopédico Verbo. Mind-Verbo & Novis.http://enciclopediaverbo.clix.pt/cgi-bin/consulta.cgi?artigo=guerra+mundial

Warnecke, H. (1993) The Fractal Company A Revolution In Corporate Culture. Springer-Verlag: Germany.

Weng, M. and Ren, H. (URL) “A Review of Multi-agent Scheduling”. http://www.eng.usf.edu/~ren/agentrev.html

White, J. E. (1994). “Telescript Technology: The Foundation for the Electronic Marketplace”. White paper, General Magic, Inc., 2465 Latham Street, Mountain View, CA 94040.

Wooldridge, M. (1992) “The Logical Modelling of Computational Multi-Agent Systems”. PhD Thesis, Faculty of Technology, University of Manchester. August 1992.

Wooldridge, M. (1997) “Agent-Based Software Engineering”. IEE Proceedings on Software Engineering, 144(1), pp.26-37, February 1997.

Wooldridge, M. (1999) “Intelligent Agents: Introduction”. In: G. Weiss; W. van der Hoek and M. Wooldridge (Eds.) Proceedings of the First European Agent Systems Summer School. University of Utrecht, The Netherlands. July 26-30, 1999.

Wooldridge, M. and Jennings, N. (1995) “Intelligent Agents: Theory and Practice”. Knowledge Engineering Review, October 1995. (disponível online em http://www.elec.qmw.ac.uk/dai/pubs/)

Wyns, J. (1999) “Reference Architecture for Holonic Manufacturing Systems – the key to evolution and reconfiguration”. PhD Thesis, Production and Automation Division, Katholieke Universiteit Leuven. Leuven, Belgium, March 1999.

Yoshikawa, H. (1993) “Intelligent Manufacturing Systems: Technical cooperation that transcends cultural differences”. Information Infrastructure Systems for Manufacturing, IFIP Transactions B-14. 1993. Elsevier Science B.V.: Amsterdam, Holland.

Zohoor, M. (1998) “Interactive Computer Network System Based on Computer Integrated Manufacturing”. In Proceedings of The International Conference on Collaborative Networked Learning, February 16-18. New Deli, India.